Muswell Models
OO Gauge/4mm Residential Buildings
The following buildings are all resin cast kits, with etched brass windows and doors. They require glue and paint to finish. However, a kit building service is available; prices on application.
Click on Pictures to Enlarge
1970’s built house (note no chimney). Finished in plain bond. Typical design, now to be found anywhere up and down the country in towns, cities or rural estates. The model is available in three formats, namely: HSE01 (whole building: 72mm Wide: 115mm High: 101mm Deep) £18.95: HRF01 (half relief, front (left photo): 61mm Deep) £10.95 and HRR01 (half relief, rear (right photo): 40mm Deep) £9.95.
Based on a design
now standing at the site of what was Evercreech New station.
Finished in roughcast concrete. Another,
fairly typical plain design, commonly seen around the Country.
Available in three formats, namely: HSE02 (whole building: 161mm
W:90mm H: 114mm D) £19.95 HRF02 (half relief, front (left photo):
45mm D) £10.95 and HRR02 (half relief, rear (right photo): 45mm
D) £10.95
Typical pre-war design, common throughout many towns and cities. Finished in English bond. Available in three formats, namely: HSE03 (whole building: 124mm W:119mm H: 115mm D) £23.95 HRF03 (half relief, front (left photo): 69mm D) £10.95 and HRR03 (half relief, rear (right photo): 46mm D) £14.95
Another typical pre-war design, common throughout many towns and cities. Finished in plain bond. Available in three formats, namely: HSE04 (whole building: 112mm W:80mm H: 102mm D) £19.95 HRF04 (half relief, front (left photo): 40mm D) £10.95 and HRR04 (half relief, rear (right photo): 40mm D) £10.95
Low-relief side/end elevation models. Sash windows, plain bond finish. HLS01 £9.95 (left), HLS02 £9.95 (right): 131mm W: 116mm H: 29mm D
Low-relief block of flats. 1960’s design, finished in roughcast concrete. FRR01 £19.95: 180mm W: 156mm H: 41mm D
Low-relief block of flats. Pre-war, finished in plain bond. FRR02 No longer Available: 320mm W: 160mm H: 78mm D